| 翻訳と辞書 |
| BIOS Boot Specification ： ウィキペディア英語版 |
Option ROM
An Option ROM typically consists of firmware that is called by the system BIOS. For example, an adapter card that controls a boot device might contain firmware that is used to connect the device to the system once the Option ROM is loaded.
== Standard IBM PC BIOS ==
This section refers to how option ROMs are used with standard IBM PC compatible BIOSes (most desktop computers).
A common example of an option ROM is the Video BIOS found on all standard PC video cards. This is a special case of an option ROM, as it is loaded very early on in the boot process (otherwise nothing would appear on the screen during the POST.) It is usually easy to tell when this particular ROM is initialized, as it is the first time something appears on the monitor since the computer was switched on. Unless working with an embedded system, the video BIOS is almost always located in the C000 memory segment (i.e. the very start of the memory area reserved for option ROMs.) Other ROMs can be located from segments C800 all the way up to E000. The BIOS Boot Specification (BBS) requires that option ROMs be aligned to 2kB boundaries (e.g. segments C800, C880, C900, C980, etc.). The first two bytes of the ROM must be 55 AA.〔(The execution environment of Etherboot )〕
After the basic POST checks are complete, the option ROMs are normally initialized. This gives them the chance to hook (intercept) system interrupts, in order to provide increased functionality to the system.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Option ROM」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|